Home / Guides / PC cooling

Plan a PC liquid-cooling loop before buying parts

Build a useful parts plan around your hardware, case clearances, maintenance access, and compatibility documentation.

US Liquid Cooling editorial · Reviewed · 3 min read

A successful custom-loop project starts with a complete plan, not a cart full of attractive components. The objective is to make every part fit the computer, connect correctly, and remain accessible when the system needs attention. This planning guide is intended for a new builder preparing a shortlist; installation details must come from the manuals for the actual products purchased.

Define what the loop must do

Write down the hardware you want to cool and the reason for building a loop. A CPU-only project, a CPU-and-GPU build, and a display-focused computer have different priorities. Separate essential requirements from preferences such as tube color or lighting. If quiet operation is the goal, include the room, typical workload, and acceptable fan behavior in your brief rather than assuming liquid cooling guarantees silence.

Give the project a practical boundary. Decide whether you want to assemble and maintain it yourself or pay a specialist builder. Allow for tools, spare fittings, and coolant in addition to the visible hardware. Keep the original cooling hardware and documents where appropriate, and check the effect of modifications on the product warranty before disassembly.

Identify the exact components

Create an inventory with the full CPU socket, motherboard model, graphics-card product code, case, power supply, and memory dimensions. A family name alone is not enough for a GPU block. Use manufacturer compatibility lists or obtain written confirmation where a revision is unclear. CORSAIR's configurator illustrates why this information is requested: the selected hardware determines which parts can be proposed.

Record the result beside each proposed block, including the source link and review date. Treat an unanswered compatibility question as an open item rather than a probable fit. This makes it easier to ask a retailer one precise question instead of sending an entire build and hoping it will catch every conflict.

Draw the physical arrangement

Sketch the locations of the blocks, radiator, fans, pump, reservoir, fill point, and drain access. Use the case drawing and component dimensions. Include space for fittings, tube bends, power cables, and removing a graphics card. A radiator mounting location does not guarantee every radiator thickness and fan arrangement will fit together.

Think through assembly order as well as the finished appearance. Ask whether a fitting can still be tightened once the radiator is installed and whether you can reach the reservoir without removing a major part. A simple arrangement that you can inspect and service is often easier to live with than a crowded one selected entirely for appearance.

Build a connection list

List each connection and identify the tubing standard, fitting type, and any necessary adapter. Add stop plugs for unused ports and the accessories required by the chosen drain arrangement. Keep tube dimensions written in one consistent format to avoid mixing similar-looking sizes. Follow the specific manufacturers' material and coolant guidance.

Then create a bill of materials with quantities, exact model numbers, and the supplier for each item. Check what comes in the box before buying duplicates. Conversely, do not assume a product photograph proves that mounting brackets, controllers, or adapters are included.

Close the plan before ordering

Before payment, review five points: confirmed compatibility, sufficient clearance, complete connections, an approved coolant choice, and an installation and testing procedure you can follow. Ask a knowledgeable retailer or builder to review the remaining uncertainties. Save the final list and documentation with the order records. That small project file will be useful when you expand, troubleshoot, sell, or service the computer later.

Sources & further reading

Use the manufacturer’s instructions for your exact equipment. Read our editorial policy or suggest a factual correction.

Explore the company directory → · All liquid-cooling guides →

01
Buying guides

Laser Chiller Buying Guide: What to Check Before Choosing

The right laser chiller depends on more than the wattage printed on the machine. Build a useful specification around heat load, flow, temperature, and support.

↗
02
Components & fluids

Specify quick disconnects as part of the complete loop

Compare connector location, mating interfaces, fluid compatibility, service access, and documentation before selecting quick disconnects.

↗
03
Buying guides

240mm vs 360mm AIO: Which Size Does Your PC Need?

A bigger radiator can offer useful headroom, but case fit and real workloads decide whether it is worth buying. Here is how to compare the two sizes.

↗

Directory matches are starting points for research. Confirm product fit and availability with the company.