Home / Guides / PC cooling

Plan radiator and fan clearance in a custom PC

Check radiator length, thickness, fittings, fan space, and adjacent hardware before selecting a mounting position.

US Liquid Cooling editorial · Reviewed · 3 min read

A case specification that lists radiator support is a useful starting point, but it is not a complete fit check. A real installation includes the radiator body, end tanks, fittings, fans, screws, cables, and neighboring components. Planning those together can prevent a build from stalling after most of the hardware has already been purchased.

Read dimensions beyond the size label

Treat a radiator's nominal size as a category, not a complete drawing. Find the manufacturer's overall length, width, and thickness, then locate the port positions. For example, CORSAIR publishes thickness information on its XR5 product page; the broader lesson is to use the dimensions of the exact model rather than transferring assumptions between products.

Compare the dimensions with the case's own drawings and notes. Check whether the listed support assumes a particular fan arrangement or requires removal of another bracket. If a case supports more than one radiator, determine whether those positions can be occupied at the same time with your selected parts.

Account for everything attached to the radiator

Add the fans to the space requirement and consider where their cables will run. Include the fitting body and the space needed for the tube to leave it without an unsuitable bend. In a compact build, these small items can determine whether the radiator fits more than its advertised length does.

Check the screw instructions carefully. Use only the type and length appropriate for the radiator, fan, and mounting arrangement. Do not treat a screw supplied with another component as interchangeable merely because it starts threading. Keep hardware identified during assembly and consult the manual if a mounting stack changes.

Check adjacent hardware

Top-mounted radiators can compete with memory modules, motherboard heatsinks, and power connectors. Front or side mounting can affect graphics-card clearance, reservoir placement, or cable routing. Bottom mounting may conflict with other hardware or make servicing less convenient. The objective is not to declare one position universally best, but to verify the entire layout you intend to build.

Make a simple top and side sketch with the relevant dimensions. If you are uncertain, use a cardboard representation of the proposed component while the system is unpowered and safe to handle. Do not force hardware into place or modify a case based on an approximate drawing without understanding what is affected.

Include the airflow path

The radiator needs an appropriate airflow arrangement, not merely a vacant mounting rail. Consider where air enters and exits the case and whether filters or decorative panels constrain access. The choice of fan orientation should follow the overall case plan and product instructions. Review the placement of other air-cooled components as well.

Avoid choosing the thickest radiator solely because it appears more capable. The usable configuration depends on available room, fans, airflow resistance, noise expectations, and the thermal requirement. When comparing specifications or tests, make sure the operating conditions are relevant to the arrangement you can actually install.

Plan access for the next service

Before finalizing the layout, identify how you will reach ports, remove fans, clean filters, and drain the loop. Ask whether a fitting becomes inaccessible after the motherboard or power cables are installed. A configuration that fits only through a difficult sequence may be inconvenient whenever a component needs attention.

Keep a clearance checklist with the radiator drawing, case restrictions, fan dimensions, fitting envelope, and neighboring components. Confirm any unresolved dimensions with the supplier before ordering. That planning record turns a general claim of radiator support into a specific, reviewable installation plan for your computer.

Sources & further reading

Use the manufacturer’s instructions for your exact equipment. Read our editorial policy or suggest a factual correction.

Explore the company directory → · All liquid-cooling guides →

01
PC cooling

AIO Pump Running but CPU Overheating? What to Check

Check mounting, wiring, radiator airflow and circulation when your AIO reports pump RPM but the CPU still overheats. Includes a troubleshooting table.

↗
02
PC cooling

Read radiator-fan specifications without chasing one number

Compare fan size, operating conditions, controls, and noise expectations rather than selecting radiator fans by maximum pressure alone.

↗
03
Components & fluids

Matching PC liquid-cooling fittings and adapters

Check tubing dimensions, connection types, sealing methods, and clearance before ordering cooling-loop fittings.

↗

Directory matches are starting points for research. Confirm product fit and availability with the company.